2.438 Inch | 61.925 Millimeter x 3.5 Inch | 88.9 Millimeter x 3 Inch | 76.2 Millimeter SEALMASTER MPD-39 CXU Pillow Block Bearings

bearing material:Polyacetal; overall length:12 mm; D:39 mm; maximum pv value:2.45 N/mm²; material specification:80; D:49 mm; d:35 mm; series:80F; maximum v value:0.85 m/s SFPM; maximum p value:17.5 N/mm²;

bearing material:Cast Bronze C93200 &; operating temperature range:Max 500 ºF; D:1-1/8 in; material specification:SAE 660 (C932&#; groove/plug type:None; standards met:83-7-7-3, ASTM B505,; Weight:0.294 lb; overall length:2-1/4 in; manufacturer upc number:717905061547; d:7/8

Fatigue Load Rating (kN):0.057; Limiting Speed Rating (r/min):22000; Static Load Rating (kN):1.37; d:7mm; SKU:627-2rsh/c3-skf; Cage Type:Steel; Dynamic Load Rating (kN):3.45; Weight:0.01 KGS; Clearance:C3; Seals or Shields:Two Rubber Seals;

manufacturer upc number:8865590660025; row type & fill slot:Single Row Non-Fill; bearing material:52100 Steel; maximum rpm (oil):17000 rpm; bore type:Round; closure type:One Non-Contact Shie; d:20 mm; maximum rpm (grease):14000 rpm; snap ring included:Without Snap Ring; D:52 mm;

D:200mm; Cage Type:Steel; Static Load Rating (kN):149; Availability:In Stock; Oil Limiting Speed (r/min):3600; d:95mm; Grease Limiting Speed (r/min):2600; Weight:5.98 KGS; B:45mm; Dynamic Load Rating (kN):167;

snap ring included:Without Snap Ring; maximum temperature:120 °C; bore type:Round; closure type:Open; d:85 mm; series:5200; D:150 mm; cage material:Steel Cage; precision rating:ABEC1, P0; contact angle:25 °;

groove type:Plain Interior; bushing type:Plain; inside diameter:1.2500 in; overall outside diameter:1-1/2 in; bushing material:RTFE; bushing outside diameter:1.5000 in;

Coefficient of friction µ min.:0.08; B1:4 mm; D:28 mm; d:20 mm; B:16 mm; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:0.043 kg; D1:35 mm;

d1:530 mm; B1:377 mm; G3:12 mm; G2:M 8; Lock nut:HME 31/560; B5:110 mm; d:560 mm; d3:710 mm; A:6 mm; B:85 mm;

bore type:Round; lubrication type:Lubrication Fitting; B:1-11/16 in; finish/coating:Uncoated; mounting:Tapped Base; seal type:Contact/Lip; series:209; manufacturer catalog number:130774; expansion type:Non-Expansion Bearin; standards met:UL, AFBMA, AGMA, ASM;

stud type:Regular; roller diameter:0.5000 in; eccentric stud diameter:.1900 in; stud length:0.6250 in; roller material:Steel; roller width:0.3750 in; roller shape:Flat; thread size:10-32; head type:Hex; bearing element:Needle Rollers;

dynamic load capacity:16800 N; maximum rpm:6100 RPM; series:60; snap ring included:Without Snap Ring; D:68 mm; B:15 mm; static load capacity:11500 N; inner ring width:15 mm; bearing material:High Carbon Chrome S; closure type:One Seal/One Sh;

d:360 mm; manufacturer upc number:087796225824; internal clearance:C4; bore type:Tapered 1:12; D:480 mm; cage material:Brass Cage; B:90 mm;

D:50 mm; series:JR; width:35 mm; d:45 mm; minimum radius:0.6 mm; material:Chrome Steel; lubrication hole type:Lubrication Hole;

Clearance:Standard; Dynamic Load Rating (kN):36; Availability:In Stock; Seals or Shields:Open Type; D:85mm; Oil Limiting Speed (r/min):7000; B:23mm; Cage Type:Plastic; Weight:0.54 KGS; Grease Limiting Speed (r/min):5600;